ANYU cooling caps are made using INUTEQ's innovative Dutch technology - DRY technology.
Pour the water into the cap and close it. The water then passes through a special slow-flowing cloth, allowing the water to evaporate slowly in the stroke. When the water in the cap evaporates, it also cools the head.
APPLICATION:
Pour water into the ANYU cooling caps through the opening - a cap on the back of the cap to distribute the water nicely. It is very important that you gently squeeze the water out so that excess water in the cap drains out. CAUTION: The caps should not be squeezed, just gently squeeze excess water out.
A special foam that absorbs only as much water as it needs in a stroke. It is necessary to squeeze the water out so that the water in the cap does not float, only that the foam in the cap is filled with water. If too much water is in the stroke or the foam in the stroke is not sufficiently filled with water, the cooling effects will be reduced.
During the hot summer days, the ANYU hat will keep you cool, you just have to try it.